Ariens Husqvarna Easy Ez Oil Change Tube Diameter
PATENT PENDING
THE EASIEST OIL CHANGE
Changing your oil is now easy with the EZ Oil Drain Valve!
Simply install this valve and drain your engine oil without the need for any tools and without creating a mess. Lift the lever of this nickel-plated brass ball valve and give it a quarter turn to open. To close, return the lever back to its original locked position. Learn more...
See How Quick & Easy it is!
EZ OIL DRAIN VALVE
| KEY FEATURES
|
ROBUST DESIGN |
OPTIONAL HOSE ENDS
| | The EZ Oil Drain Valve now offers the new and improved OPTIONAL HOSE ENDS. Instead of just draining the oil from the valve's drain hole, you may attach the optional Hose Ends to connect to a hose for draining the oil away from the engine. The user can choose from Just screw in the Hose End to the EZ Oil Drain Valve and tighten with a small wrench. The Hose Ends are interchangeable, making it easy to remove after changing your oil. |
| Straight | 90 Degree |
STRAIGHT HOSE END
- Easily screws into the valve body
- For users that prefer using a hose to drain oil away from the engine
- For oil pans with a side drain
- May be removed after draining oil
L-SHAPED HOSE END
90 DEGREE ELBOW
- Easily screws into the valve body
- Perfect to prevent hose from kinking
- Adjustable hose end- Rotates 360°
- Secure position with the built-in lock nut
- For limited clearance applications
FOR ALL APPLICATIONS
|
|
SOLID CONSTRUCTION | The ball valve design allows a straight flow for fast drainage and a flawless seal when locked closed, double sealed for guaranteed leak proof operation. The ball valve design of the EZ Oil Drain Valve is a great design, because unlike spring-assisted gate valves, it can withstand higher pressure and engine vibration. Our valves have been rated and tested up to 250 PSI. The EZ Oil Drain Valve incorporates the ball valve design with a nickel-plated body for additional protection from the elements. |
SAVE MONEY
Reduce maintenance costs with the EZ Oil Drain Valve
- Eliminate frozen drain plugs
- Eliminate stripped threads
- Prevent engine damage from routine oil analysis
- Less down time and operating expenses
EASY INSTALLATION
How to Install:
1. Remove drain plug and drain oil
2. Hand install the valve until tight, and give 1/8 turn with a small crescent wrench on the body. (DO NOT OVER-TIGHTEN!)
3. Close the lever and refill with engine oil How to Drain Oil:
1. Lift up the lever and turn counter-clockwise.
2. Turn back the lever to close.
3. Make sure the lever is fully-closed and secured in its locked position.
(Adapter may be required for recessed oil pans.) *Note:O-rings NOT required for (i.e. EZ-200, EZ-201, EZ-202, EZ-110, & EZ-115) as they are self-tightening tapered threads. ATTENTION!
For users under extreme conditions such as, off-road vehicles, agricultural tractors, and logging equipment (i.e. corn fields, brush areas), it is advised that a hose clip as shown below be applied for additional safety and security. Hose clips can be purchased at any hardware stores and will securely keep the lever closed in the locked position at all times.
WHERE TO BUY
EZ OIL DRAIN VALVE DEALER LOCATOR
CONTACT US
To find out more, download a product brochure:
| EZ Oil Drain Valve A.pdf | |
| File Size: | 23148 kb |
| File Type: | |
Download File
| EZ Oil Drain Valve B.pdf | |
| File Size: | 20306 kb |
| File Type: | |
Download File
Source: https://ezoildrainvalve.com/
0 Response to "Ariens Husqvarna Easy Ez Oil Change Tube Diameter"
Enviar um comentário